Description
These direct-coupled damper actuators provide adjustable modulating control for: air dampers, air handling units, ventilation flaps, louvers, and reliable control for air damper applications with up to 4.6 m2/50 sq ft (seal-less dampers; air friction-dependent).
Features
- Control for air damper applications with up to 50 sq ft assuming 3.5 in-lb per sq ft of damper area, velocity independent.
- Patented self-centering shaft adapter.
- Access cover to facilitate connectivity.
- Declutch for manual adjustment.
- Mechanical end limits.
- Field-installable auxiliary switches.
- Rotation direction selectable by switch.
- Mountable in any orientation (no IP54 if upside down). Mechanical position indicator.
- CE approved. UL approved.
Specifications
- : Direct Coupled, General Purpose, Non-Spring Return Actuator
- Actuator Type: Damper, Valve
- Application Type: HVAC
- Fail Safe Mode: Non-Spring Return
- Control Signal: 2 position, Floating
- Supply Voltage: 24 Vac +20%, -15%, 24 Vdc
- Number of Internal Auxiliary Switch: 0
- External Auxiliary Switches Available: Yes, SSW2-1M
- Shaft Adapter Type: Self-centering clamping
- Manual Operation: Declutch mechanism
- Mounting: Direct Coupled
- Frequency: 60 Hz, 50 Hz
- Rotational Stroke: 95 +/- 3 degrees
- Rotation To Open: By Switch
- Dual Integral Adj. Stops (3 degree increments)
- Rotational Stroke Adjustment: Dual Integral Adj. Stops (3 degree increments)
- Compatible Damper Shafts:3/8 to 1.06 in. round or 3/8 to 11/16 in. square
- Power Consumption: 5 VA
- Temperature Range: -5 F to +140 F
- Environmental Rating: NEMA2
