Honeywell, Inc. M9484F4019 MODUTROL IV MOTOR

Description

Honeywell Modutrol IV Motor. 75 lb-in, NSR, Proportional Flame Safeguard Firing Rate, 2 Aux. Switches, 24V
Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replaces M941A,C,D motors.

Features
Designed for flame safeguard applications in commercial/industrial oil or gas burner system.
Vibration resistant electronic drive circuit.
Regulated by three-wire proportional controller.
Stroke is field-adjustable to 90 or 160 degrees.

Product Specifications
Dimensions (in.): 6.45 in high x 5.5 in wide x 7.3 in deep
Dimensions (mm): 164 mm high x 140 mm wide x 185 mm deep
Item Type: Product
Frequency: 50 Hz; 60 Hz
Approvals, Underwriters Laboratories Inc.: Listed: File No. E4436, Guide No. XAPX for USA and Canada
Supply Voltage: 24 Vac
Power Consumption: 15 W
Timing: 90 degree stroke– 15 seconds, 160 degree stroke– 30 seconds
Ambient Temperature Range (F): -40 F to +150 F
Ambient Temperature Range (C): -40 C to +66 C
Input Signal: 135 ohm
Internal Auxiliary Switch: 2
Auxiliary Switch Ratings: 120 Vac– 7.2 AFL, 43.2 ALR, 40 VA pilot duty opposite contact; At 240 Vac– 3.6 AFL, 21.6 ALR, 40 VA pilot duty opposite contact
Stroke: Adjustable; 90 to 160 degrees, Symmetrical
Shaft Dimensions (in.): double-ended, 3/8 in. square
Torque Rating (lb-in.): 75 lb-in.
Torque Rating (Nm): 8.5 Nm
Additional Torque Ratings (lb-in.): Breakaway– 150 lb-in.
Additional Torque Ratings (Nm): Breakaway– 17.0 Nm
Auxiliary Switch Setting: 54 and 8 degrees
Factory Stroke Setting: 90 degrees
Shaft Dimensions (mm): double-ended, 9.5 mm square
Deadweight Load on Shaft: Either End– 200 lb (300 lb combined power and auxiliary shafts); 90.8 kg (136 kg combined power and auxiliary shafts);