Honeywell, Inc. M9484F1049 Modutrol IV Motor

Description

Product Specifications
Auxiliary Switch 2
Auxiliary Switch Setting 35 and 120 degrees
Overview Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replace M941A,C,D motors.
Torque Rating (lb-in.) 150 lb-in.
Torque Rating (Nm) 17 Nm
Input Signal 135 ohm
Torque Rating, Breakaway (lb-in.) 300 lb-in.
Torque Rating, Breakaway (Nm) 34.0 Nm
Timing (90 degree stroke) 30 seconds
Timing (160 degree stroke) 60 seconds
Crankshaft double-ended, 3/8 in. (9.5 mm) square
Stroke Adjustable; 90 to 160 degrees, Symmetrical
Deadweight Load on Shaft (Either End) (lb) 200 lb (300 lb combined power and auxiliary shafts)
Deadweight Load on Shaft (Either End) (kg) 90.8 kg (136 kg combined power and auxiliary shafts)
Voltage 24 Vac
Frequency 60 Hz
Temperature Range, Ambient (F) -40 F to +150 F
Temperature Range, Ambient (C) -40 C to +66 C
Switch Ratings, 120 Vac 7.2 AFL, 43.2 ALR, 40 VA pilot duty opposite contact
Switch Ratings, 240 Vac 3.6 AFL, 21.6 ALR, 40 VA pilot duty opposite contact
Power Consumption 15 W
Dimensions (in.) 6.45 in high x 5.5 in wide x 7.3 in deep
Dimensions (mm) 164 mm high x 140 mm wide x 185 mm deep
Approvals, Underwriters Laboratories Inc Listed: File No. E4436, Guide No. XAPX for USA and Canada
Factory Stroke Setting 160 degrees
List Price 1578.59

Modutrol IV Motor, 150 lb-in, 2 Switch

• Designed for flame safeguard applications in commercial/industrial oil or gas burner system. • Vibration resistant electronic drive circuit. • Regulated by three-wire proportional controller. • Stroke is field-adjustable to 90 or 160 degrees.